SynLube logo          SynLube™ Lube-4-Life®

Home Contents Price List How to Order SynLube Uses No Oil Change History Oil Comparison Contact Us LINKS

Oil Filters
Motor Oil ATF Gear Oil PSF Grease Coolant Oil Filters Magnets Brake Fluid

 

HappyDropBYsm.gif (1583 bytes)

risk_free_sm_trans.bmp (18066 bytes)

Oilfilte.gif (2095 bytes)  SynLube ™
100%  SYNTHETIC  MEDIA  SUPER    FILTERS
Semi-Permanent replacement for Cellulose media Oil Filters

Oil Filter Element Detail.BMP (41238 bytes)

Description

The SynLube™ Oil Filters may look the same as the conventional Oil Filters that they replace, but the similarity ends there. The SynLube™ Oil Filters offer superior performance well beyond that of conventional oil filters, including:

bulletCleaner Oil - Substantial improvement in multiple-pass filter efficiency
(95% vs. 80% for conventional filters)
is achieved through the use of synthetic MicroGlass fibers in the filter media.
bulletWire Backing - protects the filter media from tears and provides uniform spaces between each pleat for improved oil flow.
bulletImproved housing to base crimp - reduces potential for Filter Failure due to Pressure Build-up - SynLube™ Oil Filter outperforms conventional filters by 2.5 to 1
in hydrostatic pressure testing (steadily increasing pressures).
bulletThicker gauge housing - reduces potential for Filter Failure Due to Repeated Pressure Surges at Start-up - SynLube™ Oil Filter outperforms conventional filters by 3 to 1
in cyclic pressure impulse testing (SAE J806, 0-100 PSI @ 0.5 Hz).
bulletEasier Filter Removal After Use -
Non-stick filter gasket allows for easier removal of the filter at the end of its useful life.

Key Benefits

bulletLong Service Life - up to 10 Years or 100,000 miles
bulletTraps up to 5 times more contaminants *
bulletImproves Filtered Oil Flow by up to 80% @ 30°F (-1°C) *
bulletTraps particles that are up to 4 times smaller *
(10 microns  vs. 40 microns )

* when compared to Conventional Cellulose media Oil Filters,
   Test Results based on SAE J 1858 Testing Procedure


hdfilter3.jpg (90264 bytes)

anicolor.gif (1422 bytes)

Other Benefits

The SynLube™ Oil Filters outperform conventional filters in several key tests:

bulletSingle pass efficiency (SAE J806) of 98% vs. an 85% average for conventional filters.
bulletMultiple pass efficiency (SAE J806) of 95% vs. an 80% average for conventional filters.
bulletHydrostatic burst strength of 600 PSI  vs. 240 PSI average for conventional filters.
bulletIn pressure impulse fatigue testing (SAE J806, 0-220 PSI @ 0.5 Hz),
over 25,000 cycles vs. less than 1,000 cycles to failure for conventional filters.
bulletSynthetic MicroGlass filter fibers create smaller, more consistently sized openings,
which improves oil flow and traps smaller (8 to 10 micron) contaminants.
bulletAll metal end cap construction along with wire backing of synthetic filter media and steel coil spring loading of the filter element provides for "grounded" construction which eliminates "static build-up".

 

Filtration

SynLube™   MicroGlass™ technology uses special synthetic glass microfibers that are about 10 times smaller than conventional cellulose filter fibers (shown below). This allows a full flow oil filter to have following performance:

bullet99% particle removal that are 10 micron in size
bullet98% particle removal that are  7 micron in size
bullet95% particle removal that are  5 micron in size

fibercl3sm.BMP (172262 bytes)        fibermg3sm.BMP (172262 bytes)
Typical Cellulose Filter Media                SynLube™ MicroGlass™ Media

  
      Most manufacturers that make low cost filters do not disclose or advertise any data on their products filtration range or efficiency, but research done by General Motors indicates following:

bulletTypical low cost oil filter will remove about 40% of particles in 8 to 10 micron range
bulletTypical OEM oil filter will remove about 72% of particles in 8 to 10 micron range

Want to Know MORE ?
Just Click the link(s) below

bulletALL ABOUT OIL FILTERS
bulletHOW OIL FILTERS WORK
bulletFILTER MEDIA
bulletFILTER MAGNETS

Pricing

Description Case Stripe Thread

Gasket

SKU #

 Price
Fwm Black Green 3/4"-16 63id-75od 0-91275-70016 $30.00
Fws Black Green 3/4"-16 63id-75od 0-91275-70009 $30.00
Fwl Black Green 3/4"-16 63id-75od 0-91275-70001 $24.00
Fnl - 400 Black Green 3/4"-16 63id-75od 0-91275-20400 $32.00
Fns - 53 Black Green 3/4"-16 63id-75od 0-91275-70005 $30.00
FSnm Black Blue 3/4"-16 54id-63od 0-91275-10827 $30.00
FSns White Blue 3/4"-16 54id-63od 0-91275-76158 $30.00
FSmini Black Blue 3/4"-15 54id-63od 0-91274-76160 $30.00
GLwl Black White 13/16"-16 80id-90od 0-91275-70002 $24.00
GLwm Black White 13/16"-16 80id-90od 0-91275-70006 $22.00
GSwl White Black 13/16"-16 60id-70od 0-91275-73538 $24.00
GSwm Black   13/16"-16 60id-70od 0-91275-70017 $22.00
GSnl Black   13/16"-16 60id-70od 0-91275-70008 $24.00
GSns Black   13/16"-16 60id-70od 0-91275-16804 $30.00
J20ns Black Purple M20-1.50 54id-63od 0-91275-73462 $24.00
M18nl Black Yellow M18-1.50 60id-70od 0-91275-73554 $22.00
M18ns Black Yellow M18-1.50 60id-70od 0-91275-70003 $26.00
M20ws Black Orange M20-1.50 61id-73od 0-91275-70015 $20.00
M22wm White Red M22-1.50 60id-70od 0-91275-70021 $26.00
CH3970 none   none none 0-01275-10828 $18.00

Note: Gasket  id (internal diameter) & od (outer diameter) are in millimeters.

CROSS-REFERENCE

SynLube

FRAM

AC

 Motorcraft Purolator

Wix

 Fleetguard
GLwl PH13 PF35 FL12 L30040 51061  
GLwl PH05 PF352 FL12DP PER40 10 LF3488
GLwl   PF1218 FL12FP PER4000 3  
GLwm PH30 PF25 FL10 L20049 51069  
GSnl PH3429 PF45 FL331 L20123 51045  
GSwm PH25 PF24 LF9 L20033 51258  
GSwl           LF3538
Fws PH16 PF13 FL332 L14670 51085  
Fws     FL5 L10017 51307  
Fws     FL300 L10018 51805  
Fwl PH8A PF2 FL1A L30001 51515 LF3487
Fnl PH3600 PF56 FL400 L20195 51516  
Fnl PH2825          
Fns PH3614 PF53 FL793 L10241 51348  
Fns     FL776 PER241    
Fwm PH43 PF20 FL300 L10007 51068  
Fwm PH3963          
GSns PH3506 PF44 FL330 L14006 51042  
FSnm PH3682 PF1232   L24457 51361  
M20ws PH3950 PF1177 FL403 L10193 51381  
M20ws PH2856          
M20ws PH3562          
M20ws PH3664          
J20ns PH6811         LF3462
J20ns PH3593A PF1127 FL803 L14459 51334  
J20ns PH3807A          
J20ns PH7317          
M18nl PH3980 PF52 FL402 L24011 51036 LF3554
M18ns PH3387A PF47 FL318 L10111    
M18ns     FL321      
FSns PH4967 PF1233 FL836 L14476 51056 HF6158
FSns       L22821 51394  
FSmini PH4477     L14477    
M22wm PH02 PF1250 FL820 L24651 51372  
CH3970 CH3970 PF1072 FL838 L10085 51630

CROSS-REFERENCE  OEM  Oil Filters

OEM Part Number SynLube
     
DENSO 115010-5400 Fns
DENSO 115010-5000 Fns
FORD Motorcraft FL820S M22wm
HONDA F 0630A J20ns
HONDA 15400-PH1-014 J20ns
MAZDA GY01-14-302B M22wm
Mitsubishi MD135737 J20ns
Motorcraft FL 820S M22wm
SUZUKI 16510-61A01 FSns
TOKYO ROKI LFS708 FSns
TOYOTA 90915-10003 FSmini
TOYOTA 90915-20003 Fns
TOYOTA 90915-YZZB1 Fns
TOYOTA 90915-YZZB5 Fns
     
     
     
     
     
     
     

CROSS-REFERENCE  After Market Oil Filters

Brand Part Number SynLube
Econo Lube & Tune Uses Purolator Part Numbers  
DYNA Lube D241 Fns
Group 7 V-195 Fnl
Group 7 V-4631 GLwl
Jiffy Lube HL 13 GLwl
Jiffy Lube HL 3614 Fns
MileGuard MO3600 Fnl
Mobil M1-206 GSnl
Pro Line PPL-14670 Fwm
Pennzoil PZ-19 Fnl
Quaker State QS 3682 Fnl
Texaco TFC-525 FSnl
Texaco T-1-FS Fwl
76 PH 1085 Fwm
     
     
     
     
     

SynLube Logo

Note:

SynLube™   MicroGlass™ Oil Filters are made in USA for SynLube, Inc. by several different manufacturers and are made exclusively to our specifications.

 

[ Home ] [ Up ] [ Motor Oil ] [ ATF ] [ Gear Oil ] [ PSF ] [ Grease ] [ Coolant ] [ Oil Filters ] [ Magnets ] [ Brake Fluid ]

 

Send mail to synlube@synlube.com with questions or comments about this web site.
Copyright © 1996-2010 SynLube, Inc.
Last modified: January 3, 2010

Lube-4-Life® is a Registered Trademark of SynLube, Inc.